USED VERSION 45 TON X 6 1/2' PRESS BRAKE AIR CLUTCH, EXCELLENT CONDITION, USED DAILY IN OUR FACILITY

$4,250

USED CINCINNATI MODEL 9 12' X 225 TON PRESS BRAKE POWER RAM ADJUSTMENT, REMOVED FROM OPERATING FACILITY, RUNS/OPERATES EXCELLENT, WELL MAINTAINED, INSPECT UNDER POWER

CNC BACK GAUGE AVAILABLE AT ADDITIONAL COST

$16,500

USED WYSONG 8' X 10 GAUGE POWER SQUARING SHEAR, MANUAL FRONT AND POWER REAR BACK GAUGE, IN EXCELLENT CONDITION, U.S. MILITARY SURPLUS UNIT

$4,850

USED TENNESMITH 4' X 12 GAUGE FINGER BRAKE, U.S. NAVY SURPLUS, BRAKE ONLY USED BY US TO TEST, WORKS GREAT

 LOCATED AT OUR WISCONSIN FACILITY

$1,750

USED CINCINNATI MODEL 10 12 POWER SQUARING SHEAR WITH POWER BACK GAUGE, 12 X 10 GA CAPACITY, FRONT SQUARING ARM, SEE UNDER POWER, IN EXCELLENT CONDITION 

$12,500

USED CINCINNATI MODEL 5 8' X 135 TON PRESS BRAKE POWER RAM ADJUSTMENT, AIR/ELECTRIC CLUTCH, REMOVED FROM OPERATING FACILITY, RUNS/OPERATES EXCELLENT, WELL MAINTAINED, INSPECT UNDER POWER

$10,500

USED CINCINNATI MODEL 5 8' X 135 TON PRESS BRAKE POWER RAM ADJUSTMENT, AIR/ELECTRIC CLUTCH, REMOVED FROM OPERATING FACILITY, RUNS/OPERATES EXCELLENT, WELL MAINTAINED, INSPECT UNDER POWER

$9,850

USED PIRAHANNA MODEL P50 HYDRAULIC IRON WORKER, 13/16 HOLE - 3/4", 5" X 5" X 3/8" ANGLE, 5/8 X 14" X 3/4" - 10" BAR SHEAR, COPER NOTCHER, PRESS BRAKE ATTACHMENT - MISC. TOOLING, S. N. P- 505-641, IN EXCELLENT CONDITION 

$12,000

USED DO ALL SAW.  BAND SAW WITH TABLE, IN GOOD CONDITION  

$4,200

USED VERSON 115 TON X 12' PRESS BRAKE WITH AIR CLUTCH, A.S.A.P. CNC BACK GAUGE, DIE & STRIKER, SEE UNDER POWER, IN EXCELLENT CONDITION 

$19,500

USED 4' X 12 GAUGE FINGER BRAKE, IN EXCELLENT CONDITION

USED PEXTO 10 GA X 6' POWER SQUARING SHEAR, USED DAILY, SEE UNDER POWER, IN EXCELLENT CONDITION 

$4,500

USED BERTSCH HYDRAULIC SHEAR, 1/2 X 10' CAP WITH POWER BACK GAUGE, SEE UNDER POWER, IN EXCELLENT CONDITION 

$25,000

USED MILLER CP-252TS MIG WELDER WITH 60 SERIES WIRE FEED, COMPLETE UNIT, REMOVED FROM A CUMMINS ENGINE FACILITY

LOCATED AT OUR WISCONSIN FACILITY

$1,500

USED LODGE & SHIPLEY 20" LATHE, SEE UNDER POWER, IN EXCELLENT CONDITION 

$3,000

USED PIRAHNNA MODEL P-90 IRON WORKER 90 TON, USED DAILY, WITH SOME TOOLING, SEE UNDER POWER, IN EXCELLENT CONDITION 

$20,000

$6,000

USED LINDE/UNION CARBIDE MIG WELDER, IN EXCELLENT CONDITION 

$500

USED HENDEY 16 X 54 LATHE, IN EXCELLENT CONDITION 

$3,000

USED LOWN 4' INITIAL PINCH ROLL, USED DAILY, SEE UNDER POWER, IN EXCELLENT CONDITION  

$4,500

USED DO ALL MODEL C9V HORIZONTAL BAND SAW, 1" BLADE, COOLANT SYSTEM, ADJUSTABLE BLADE SPEED, ALL CONTROLS, EXCELLENT CONDITION, WORKING IN OUR FACILITY

 LOCATED AT OUR WISCONSIN FACILITY

$2,850